Skip to main content

DDR2 Reg. ECC Xeon Quad-Core / Dual-Core UIO Server MainBoard.

SKU:
X7DCU

Description


This is a refurbished SuperMicro Super X7DCU DDR2 Reg. ECC Xeon Quad-Core / Dual-Core UIO Server MainBoard.

This Super X7DCU MainBoard has support for up to 2 Intel Xeon Quad Core or Dual Core Processors. It Supports up to 6 pieces of registered DDR2 ECC Ram and is Compatable with many super micro servers. This board features an Intel 5100 (San Clemente) chipset and an Intel ICH9R SB SATAII Controller for RAID levels 0, 1, 5, 10 for Windows and 0, 1, 10 for Linux. This server board's UIO/Universal I/O technology allows users to select from a wide range of I/O options to provide the ultimate flexibility in storage and networking. When a Supermicro UIO card is installed in a UIO slot, it becomes a part of the serverboard, while still allowing the server to retain all of its PCI-Express and PCI-X slots for expansion cards.

Without a Supermicro UIO card installed, the server board functions as a complete and optimized server board. Installing a UIO card provides easy and cost effective upgrades for:

  • SAS/SATA RAID 5 & 6
  • 4-Port 1 Gbit Ethernet
  • 2-Port 10 Gbit Ethernet
  • Infiniband

Future upgrades are easy – just replace the Supermicro UIO card with any one of the multiple expansion cards available. Supermicro UIO cards minimize the complexity of your server configurations, provide cost advantages over standard expansion cards, and protect your server board investment. For information on our available SuperMicro UIO Cards please vist our UIO Card Product Page.

If you would like more information on the product: please contact our sales department by sending an email to sales@vectordata.com or by calling us at (877) Vector Data.


Specifications:


Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 13" x 8.1 " (33.02cm x 20.57cm)

Processor/Cache
CPU
  • Dual 771-pin LGA Sockets
  • Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below:
    • Quad-Core Intel Xeon Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz
    • Dual-Core Intel Xeon Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
  • 1333 / 1066 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems

System Memory
Memory Capacity
  • Six 240-pin DIMM sockets
  • Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset
  • Intel 5100 (San Clemente) chipset
  • Intel ICH9R
SATA
  • Intel ICH9R SB SATAII Controller
  • RAID 0, 1, 5, 10 support (Windows only)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 / 1.5
  • 200-pin IPMI slot (SIMSO(+))
  • (Optional: AOC-SIMSO(+))
Network Controllers
  • Intel 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel I/OAT support for fast, scaleable, and reliable networking
Graphics
  • ATI ES1000 controller with 32 MB of video memory
Super I/O
  • Winbond 83627HF chip
Clock Generator
  • CK505 chip

Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
IDE
  • Single EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 2 rear + 1 Type A connector + 2 headers (3 Ports)
  • 6 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port

Chassis ( Optimized for X8DTU-F )
1U Chassis
  • CSE-815TQ-R650U
  • CSE-815S-560U
  • CSE-812L-520U
2U Chassis
  • CSE-823MTQ-R700U
  • CSE-825MTQ-R700U
  • CSE-825TQ-R700U
Important Chassis Notes
  • To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 20-pin are required]

Expansion Slots
PCI-Express / PCI-X / UIO
  • Left Side:
    • 1 (x8) PCI-Express + 1 UIO slots or
    • 1 (x16) PCI-Express
  • Right Side:
    • 1 (x8) PCI-Express
    • For 2U configuration, Please go to UIO Riser Cards page

System BIOS
BIOS Type
  • 16Mb SPI Flash with Phoenix BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0/3.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.3

Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechansim
  • Wake-On-LAN (WOL) header
  • Power-on mode for AC power recovery
  • Internal/External modem remote ring-on

PC Health Monitoring
CPU
  • Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, 12V, +5 Stdby, VBAT
  • CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight 4-pin fans
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support for 3-pins (w/ speed control)
  • Low noise fan speed control >li>Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header

Operating Environment / Compliance RoHS
RoHS 6/6
  • RoHS Compliant 6/6, Pb Free
Environmental Spec
  • Operating Temperature: 10 to 35C (50 to 95F)
  • Non-operating Temperature: -40 to 70C (-40 to 158F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)

DDR2 Reg. ECC Xeon Quad-Core / Dual-Core UIO Server MainBoard. X7DCU