This is a 1TB Dell PowerVault 220S 14 Bay JBOD Hard Disk Drive Shelf with 14x 73GB 10,000RPM SCSI Drives and a 3 Year Next Business Day Warranty.
When your server reaches the limits of its internal storage capacity, the Dell PowerVault
rack-optimized 220S and PowerVault 221S tower SCSI enclosures offer cost-efficient external storage expansion
for Dell PowerEdge servers and PowerVault storage servers. Supporting popular industry standards such as
Ultra320 (U320) SCSI, SES and SAF-TE specifications, these enclosures are designed for easy installation and
configuration. And when it comes to upgrades or servicing, the chassis design helps make maintenance a snap. The 220S offers safety and reliability with dual Hot-Plug Redundant power supplies and a 3 Year Next Business Day Warranty.
Features:
- 14x Dell 2R7007 73GB, 10,000RPM SCSI Hot-Swappable Hard Drives.
- Y0317 Kit, Card, Duaghterboard, PV22XS Split Bus
- U0675 Printed Wiring Assy, Interface, Backplane, PowerVault 22Xs, SCSI
- 9X809 Power Supply, 600W, Power Factor Correction, Redundant, Hot Plug
- 8R565 Kit, Card, Input/Output, U320 Zappa Enclosure Mgmt Module LSI Logic
- 7G297 Kit, Card, Terminator, SCSI (SMALL COMPUTER SYSTEMS INTERFACE)..., PowerVault22XS
If you would like more information on the PV220S: Please contact our sales department by sending an email to sales@vectordata.com or by calling us at (877) Vector Data.
Specifications:
| Technical Highlights and Expandability |
| Disk drives | - Up to 14 320MB/s Ultra320 (U320) LVD SCSI 1" x 3.5" drives
- Hot-plug hard drives, 36GB, 73GB, 146GB or 300GB at 10,000rpm or 36GB, 73GB
or 146GB at 15,000 rpm
- SCSI buses can be configured for a single 14-device SCSI bus, a single
clustered 13-device SCSI bus, or two independent 7-device SCSI buses
| Back-panel connectors | - SCSI connectors: 68-pin shielded P-type SCSI for connection to host
| Backplane board connectors | - Hard drives: fourteen 80-pin SCA-2 connectors
- Power supply and cooling module: two high-current connectors
- Enclosure management module (EMM): 210-pin connector
- Split-bus module: 180-pin connector
| Enclosure modules | - Enclosure management module: two warm-swappable modules to
help monitor and report component status
- Split-bus module: one warm-swappable module with an external slide
switch to change between split, joined and cluster modes
- Terminator card: one warm-swappable module to terminate SCSI bus
if only one EMM is configured
| LED indicators | - Front panel: five status LED indicators for power, fault, split-bus,
cluster mode, and temperature
- Hard-drive carrier: one single-color activity LED and one two-color
status LED indicator per drive
- Enclosure management module: three status LED indicators for power,
fault, and primary or secondary functionality
- Split-bus module: one LED indicator for power
| Power supply and cooling module | - Three status LED indicators for power supply status, power supply fault, and AC status and two for cooling module fault
| Wattage | - 600 watts
| Heat dissipation | - 200 watts
| Voltage | - 100 - 240 volts rated (actual 85 - 264)
| Frequency | - 50 - 60Hz
| Amperage | - 9.4A at 100 volts, 4.6A at 200 volts
| Dimensions | - (H x W x D): 5.22" x 17.55" x 20" (13.2 cm x 44.5 cm x 50.8 cm)
| Weight | - PowerVault 220S 71.5 lbs. (32.4 kg) maximum redundant configuration
with all hard drives installed
- PowerVault 221S 93.0 lbs. (42.2 kg) maximum redundant configuration
with all hard drives installed
| Temperature |
- Operating: 50F to 95F (10C to 35C)
- Storage: -40F to 149F (-40C to 65C)
| Relative humidity |
- Operating: 8% to 80% (noncondensing)
- Storage: 8% to 95% (noncondensing)
| Altitude | - Operating -50 ft. to 10,000 ft. (-16 m to 3048 m )
| British thermal unit | | | | | | | | | | | | | | | | | |
PowerVault 220S JBOD Disk Shelf w/ 14x 73GB 10K SCSI HDs PV220S 2R7007, Y0317, U0675, 9X809, 8R565, 7G297
