Description
This is a NEW SuperMicro Super X8DTT-F World First DDR3, QPI, 1U-Twin MainBoard Integrated IPMI2.0 w/ KVM and Dedicated LAN.
This Supermicro Super X8DTT-F World First DDR3, QPI, 1U-Twin MainBoard runs in line with SuperMicro's goal to create a greener computing market. Its compact yet powerfull design is the backbone of their twin server and twin server squared systems that allow for more power and capability within a smaller form factor. Save money, save space and save the enviornment by choosing SuperMicro. SuperMicro Twin server systems allow you to start with one node and expand from there. Whether for expansion of an original system or as the beginning to a new one this board is an ideal choice for those with growth in mind.
If you would like more information on the product: please contact our sales department by sending an email to sales@vectordata.com or by calling us at (877) Vector Data.
Specifications:
| Features: | Form Factor: | Proprietary | |||||
| Dimensions: | 16.64" x 6.5 " (42.26cm x 16.51cm) | ||||||
| Processor/Cache:: |
Dual 1366-pin LGA Sockets
Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
| ||||||
| QPI: | up to 6.4 GT/s | ||||||
| System Memory: |
Memory Capacity:
Error Detection: |
Corrects single-bit errors
| Detects double-bit errors (using ECC memory) Supports Intel x4 and x8 Single Device Data Correction (SDDC) Expansion Slots: |
PCI-Express |
Chassis ( Optimized for X8DTT-F): |
1U Chassis |
|
| On-Board Devices | Chipset: |
Intel 5500 (Tylersburg) chipset
ICH10R + IOH-36D |
| SATA: |
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| IPMI: |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond WPCM450 BMC |
| Network Controllers: |
Intel 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics: | Matrox G200eW |
| Super I/O: | Winbond W83527HG chip |
| Clock Generator: | 932S421 chip |
| Input / Output | Serial ATA: | Six Serial ATA ports Six SATA hard drives supported |
| LAN: | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB: | 2 rear + 1 header (2 Ports) 4 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA: | 1x VGA Port |
| Serial Port: | 1 Fast UART 16550 serial port |
| System Bios | BIOS Type: | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features: |
Plug and Play (PnP)
PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Management | Software: |
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Super Doctor III Watch Dog NMI |
| Power Configurations: |
ACPI Power Management
Main Switch Override Mechansim Power-on mode for AC power recovery |
| PC Health Monitoring | CPU: |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator |
| FAN: |
Total of four 4-pin PWM fans
4x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control (4-pin fan only) |
| Temperature: |
Monitoring for CPU and chassis environment
CPU thermal trip support Thermal Control for 4x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED: |
Power Fail / Overheat LED Suspend-state Indicator LED UID LED |
| Other Features: | SDDC Support |
| Operating Environment / Compliance | RoHS 6/6: | RoHS Compliant 6/6, Pb Free |
| Environmental Spec: |
Operating Temperature: 10 to 35 C (50 to 95F) Non-operating Temperature: -40 to 70 C (-40 to 158 F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
We offer the following compatible systems.
- 6026TT-BTRF-1.86-24-6-1.5
- 6026TT-TF-8.4212
- 6026TT-TF-8212 World First DDR3, QPI, 1U-Twin MainBoard X8DTT-F
