Skip to main content

1u Dual Xeon Quad-Core PCI-E 2.0 Nvidia Fermi M2050 GPU 6x SATA Server

SKU:
SYS-1026GT-TF-FM105

Description

Supermicro 1026GT-TF-FM105 1U Rackmount Dual Xeon PCI-E 2.0 Nvidia Fermi M2050 GPU 6x SATA Server.


Call us at 1-877-Vector Data to customize your system to your needs.


Technical Highlights:

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • 1 (x4) PCI-E 2.0 (Low Profile)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • 6x Hot-swap 2.5" SATA Drive Bays
  • 1400W Gold-level High-efficiency Power Supply
  • 2x PCI-E 2.0 (x16) slots (1 on each side)

Specifications:


Features:

Chassis:

  • CSE-118G-1400B
  • Form Factor: 1U Rackmount

Motherboards

  • Super X8DTG-DF

CPU

  • Dual 1366-pin LGA Sockets
  • Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W
  • Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI
  • up to 6.4 GT/s

System Memory:

Memory Capacity

  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

  • 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

  • 1.5V/1.3V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices (per node):

GPU

  • 1x Nvidia Fermi M2050 GPU Card

Chipset (8x)

  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond WPCM450 BMC

Network Controllers

  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

  • Matrox G200eW 8 MB DDR2

Super I/O

  • Winbond W83527HG chip

Clock Generator

  • 932S421 chip
Input / Output (per node):

Serial ATA

  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA Port

Serial Port / Header

  • 1 Fast UART 16550 serial port
System BIOS:

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Dimensions:

Height

  • 1.7" (43mm)
Width
  • 17.2" (437mm)

Depth

  • 28.2" (716mm)

Gross Weight

  • 38 lbs (17.2 kg)
Front Panel:

Buttons

  • Power On/Off Button
  • System Reset Button
LEDs
  • Power LED
  • Hard Drive Activity LEDs
  • 2x Network activity LED
  • System Overheat LED/Fan fail LED / UID LED
Expansion Slots

PCI-Express

  • 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
  • 1 (x16) PCI-E 2.0 (for GPU card)
  • 2 (x8) PCI-E 2.0 slots
Drive Bays

Hot-Swap

  • 6x 2.5" Hot-swap SATA drive bays
Backplane

SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

System Cooling

Fans

  • 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
Power Supply
Power
  • 1400W high-efficiency power supply with PMBus

AC Input

  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V

Certification

  • 80 PLUS Gold Certified
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator

FAN

  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED

Other Features

  • SDDC Support
Operating Environment / Compliance:

RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10 to 35C (50 to 95F)
  • Non-operating Temperature: -40 to 70C (-40 to 158F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)

Includes the following parts:

  • Super X8DTG-DF Motherboard
  • 1U Black SC118G Chassis
  • sup six 2.5" SAS/SATA hdd; SATA con
  • 2x 6+2pin GPU power extension from MB GPU 8pin, 40cm
  • 2x 55CM SATA ROUND S-RA PBF
  • 2x 43CM SATA ROUND S-RA PBF
  • 2x 65CM SATA ROUND S-RA PBF
  • For X8 series
  • RSC-R1U-E16R
  • RSC-R1UG-E16R-O-P (right side PCIEx16 riser card)
  • RSC-R1UG-E16-O-P (left side PCIEx16 riser card)
  • 2x 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
  • 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
  • Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20"( 50cm)
  • 4x 40 x 40 x 56 mm Counter-rotating 17K /
  • 4x 40x56,4 Pin,PWM, Primary for SC818,825M, Secondary for SC815
  • 6x Black gen 3 hot swap 2.5" HDD tray
  • Rail set, quick/quick, optional for 1U 17.2"W SC815
  • NVIDIA M2050 TESLA FERMI GPU/PASSIVE HS(w/ 3GB cache memory)

    If you would like more information on the product: please contact our sales department by sending an email to sales@Vector Data.com or by calling us at (877) Vector Data. 1u Dual Xeon Quad-Core PCI-E 2.0 Nvidia Fermi M2050 GPU 6x SATA Server 1026GT-TF-FM105 SYS-1026GT-TF-FM105, 1026GT-TF-FM105