Skip to main content

1U Rackmount Xeon 2.4GHz 8GB DDR3 PCI-E 2.0 4X 500GB SATA Server

SKU:
SYS-1026TT-TF-24-8-2TB

Description

Supermicro 1026TT-TF-24-8-2TB 1U Rackmount Xeon 2.4GHz 8GB DDR3 PCI-E 2.0 4X 500GB SATA Server.


Call us at 1-877-Vector Data to customize your system to your needs.



Specifications:


Features:

Processor (Single)

  • Intel Xeon E5620
  • CPU Socket Type:LGA 1366
  • Core: Westmere
  • Multi-Core: Quad-Core
  • Operating Frequency: 2.4GHz
  • QPI: 5.86 GT/s
  • L3 Cache: 12MB
  • Support: 64 bit
  • Thermal Power: 80W

Drives/Peripherals

  • 4x 500GB 2.5" 7200 RPM SATA HDD

Memory (2 sticks of 4GB DDR3-ECC Unbuffered total)

  • Capacity: 8GB
  • Speed: DDR3-1333
  • Buffered/Registered: Unbuffered
Power Supply
  • 1200W high-efficiency power supply with PMBus
System Memory:

Memory Capacity

  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

  • 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

  • 1.5V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices (per Node)

Chipset

  • Intel® 5500 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond WPCM450 BMC

Network Controllers

  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

  • Matrox G200eW 16 MB DDR2

Super I/O

  • Winbond W83527HG chip

Clock Generator

  • 932S421 chip
Input / Output (per Node)

Serial ATA

  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA Port

Serial Port / Header

  • 1 Fast UART 16550 serial port
System BIOS (per Node)

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Dimensions

Height

  • 1.7" (43mm)
Width
  • 17.2" (437mm)

Depth

  • 27.75" (705mm)

Gross Weight

  • 40 lbs (18.1kg)
Front Panel (per Node)

Buttons

  • Power On/Off Button
  • System Reset Button
LEDs
  • Power LED
  • Hard Drive Activity LEDs
  • 2x Network activity LED
  • System Overheat LED
Expansion Slots

PCI-Express (per Node)

  • 1 (x16) PCI-E ( Low Profile)
Drive Bays

Hot-Swap

  • 4x 2.5" SATA Hot-swap drive bays
SATA Backplane

1U SATA Backplane

System Cooling

Fans

  • 6x Cooling Fans
Power Supply
Power
  • 1200W high-efficiency power supply with PMBus

AC Input

  • 100 - 140V, 50 - 60Hz, 8 - 11.5 Amp
  • 180 - 240V, 50 - 60Hz, 5.5 - 8 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 83 Amp @ 100-140V
  • 100 Amp @ 180-240V

Certification

  • 80 PLUS Gold Certified
Management

Software

  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
  • Watch Dog
  • NMI

Power Configurations

  • ACPI Power Management
  • Main Switch Override Mechansim
  • Power-on mode for AC power recovery
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator

FAN

  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED

Other Features

  • SDDC Support
Operating Environment / Compliance

RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10 to 35C (50 to 95F)
  • Non-operating Temperature: -40 to 70C (-40 to 158F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)

Includes the following parts:

  • 2x Super X8DTT-F Motherboard
  • 1U Chassis
  • 2x Sup 4x2.5ö SAS/SATA hdd; SATA con
  • 2x 8pin to 8pin cable for SGPIO, 61.5cm, PBF
  • 2x 59CM SATA ROUND S-S PBF
  • 2x 43CM SATA ROUND S-RA PBF
  • 2x 48CM SATA ROUND S-RA PBF
  • 2x 55CM SATA ROUND S-RA PBF
  • For X8 series
  • 2x RSC-R1U-
  • 4x 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
  • PDB FOR 808 CHASSIS
  • 1200W 1U GOLD LEVEL PWS WITH PM BUS
  • 2x Mylar air shroud for X8 DP, SC808, SC809
  • 2x 20" Round 20P to 20P Ribbon Cable
  • 2x 4PIN POWER CABLE, ST TO RA, 40CM
  • 6x 40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808
  • 8x Black gen 3 hot swap 2.5" HDD tray
  • Rail set for SC808,809,818

    If you would like more information on the product: please contact our sales department by sending an email to sales@Vector Data.com or by calling us at (877) Vector Data. 1U Rackmount Xeon 2.4GHz 8GB DDR3 PCI-E 2.0 4X 500GB SATA Server SYS-1026TT-TF-24-8-2TB