1U Server Dual-Node (2) Quad-Core 2.4GHz Intel Xeon 16GB RAM (8)320GB HDD LSI RAID

Processors (per Node)

• Intel Xeon E5620
• CPU Socket Type:LGA 1366
• Core: Westmere
• Multi-Core: Quad-Core
• Operating Frequency: 2.4GHz
• QPI: 5.86 GT/s
• L3 Cache: 12MB
• Support: 64 bit
• Thermal Power: 80W

Drives/Peripherals

• 8x 320GB 2.5" 7200 RPM 16M SAS HDD

Memory (4 sticks of 4GB DDR3-ECC Unbuffered total)

• Capacity: 24GB
• Speed: DDR3-1333
• Buffered/Registered: Unbuffered

• 1200W high-efficiency power supply with PMBus

Memory Capacity

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

• 1.5V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Chipset

• Intel® 5500 (Tylersburg) chipset
• ICH10R + IOH-36D

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond WPCM450 BMC

Network Controllers

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW 16 MB DDR2

Super I/O

• Winbond W83527HG chip

Clock Generator

• 932S421 chip

Serial ATA

• Six Serial ATA ports
• Six SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2 rear + 1 header (2 Ports)
• 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

• 1x VGA Port

Serial Port / Header

• 1 Fast UART 16550 serial port

BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Height

• 1.7" (43mm)

• 17.2" (437mm)

Depth

• 27.75" (705mm)

Gross Weight

• 40 lbs (18.1kg)

Buttons

• Power On/Off Button
• System Reset Button

• Power LED
• Hard Drive Activity LEDs
• 2x Network activity LED
• System Overheat LED

PCI-Express (per Node)

• 1 (x16) PCI-E ( Low Profile))

Hot-Swap

• 4x 2.5" SATA Hot-swap drive bays

1U SATA Backplane

Fans

• 6x Cooling Fans

• 1200W high-efficiency power supply with PMBus

AC Input

• 100 - 140V, 50 - 60Hz, 8 - 11.5 Amp
• 180 - 240V, 50 - 60Hz, 5.5 - 8 Amp

• 4 Amp

• 83 Amp @ 100-140V
• 100 Amp @ 180-240V

Certification

• 80 PLUS Gold Certified

Software

• IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
• Super Doctor III
• Watch Dog
• NMI

Power Configurations

• ACPI Power Management
• Main Switch Override Mechansim
• Power-on mode for AC power recovery

• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator

FAN

• Total of four 4-pin PWM fans
• 4x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 4x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED

Other Features

• SDDC Support

RoHS

• RoHS Compliant

• Operating Temperature: 10 to 35C (50 to 95F)
• Non-operating Temperature: -40 to 70C (-40 to 158F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)