2U Rackmount Dual CPU Mellanox ConnectX Intel Xeon PCI-e 2.0 12x SAS Server

Chassis:

• CSE-827HD-R1400B

• 2U Rackmount

Motherboards

• 2x Super X8DTT-HIBXF+

CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
• Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W-130W
• Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W

• up to 6.4 GT/s

Memory Capacity

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB, 16GB

Memory Voltage

• 1.5V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

• Mellanox ConnectX DDR Infiniband 20Gbps Controller

• Intel® 5520 (Tylersburg) chipset
• ICH10R

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support

• LSI 6Gbps SAS 2108 w/ Hardware RAID support via BPN-ADP-SAS2-H6iR
• RAID 0, 1, 10, 5, 50, and 6 support

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond WPCM450 BMC

Network Controllers

• Dual Intel® 82574L Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW

Super I/O

• Winbond W83827HF chip

Clock Generator

• 932S421 chip

PCI-Express

• 1 (x16) PCI-E 2.0 via riser card (low-profile)

Serial ATA

• Six Serial ATA ports
• 6 SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2 rear + 1 header (2 Ports)
• 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

• 1x VGA Port

Serial Port

• 1 Fast UART 16550 serial port

Infiniband

• 1 External QSFP Infiniband Connector

BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Height

• 3.5" (89mm)

• 17.2" (437mm)

Depth

• 28.5' (724mm)

Gross Weight

• 85 lbs (38.6kg)

Buttons

• Power On/Off Button
• UID button

• Power LED (on power button)
• Network activity LED
• System Overheat/fan fail/power fail/ LED
• UID LED (on UID button)

Hot-Swap

• 6x 3.5" Hot-swap drive bays

2U Hard drive Backplane

Fans

• 4x Cooling Fans

Power

• Redundant 1400W high-efficiency power supply with PMBus

AC Input

• 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
• 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp

• 6 Amp

• 100 Amp @ 100-140V
• 117 Amp @ 180-240V

Certification

• 80 PLUS Gold Certified

CPU

• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator

• Total of four 4-pin PWM fans
• 4x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 4x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED

• SDDC Support

RoHS

• RoHS Compliant

• Operating Temperature: 10°to 35°C (50°to 95°F)
• Non-operating Temperature: -40°to 70°C (-40°to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)