Chassis: |
- CSE-219A-R920UB
| Form Factor | |
Motherboards |
|
CPU |
- Dual 1366-pin LGA Sockets
- Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W-130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
|
| QPI |
|
| System Memory: |
Memory Capacity |
- 18x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| On-Board Devices: |
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R
|
| SAS |
- LSI 6Gbps SAS 2108 w/ Hardware RAID support
- RAID 0, 1, 5, 6, 10, 50, 60 support
- BBU (battery backup) extension kit (optional)
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond WPCM450 BMC
|
Network Controllers |
- Intel® 82599EB 10 Gigabit Ethernet Controller with 2 SFP+ interfaces
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
|
| Input / Output |
SAS |
- 8x 6Gbps SAS / SATA ports with 2 I-PASS connectors
|
Serial ATA |
- Six Serial ATA ports
- 6 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 2x SFP+ LAN port
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 5 USB 2.0 Compliant
|
VGA |
|
Keboard/Mouse | - PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
| Dimensions: |
Height |
|
| Width |
|
Depth |
|
Gross Weight |
|
| Front Panel |
Buttons |
- Power On/Off Button
- System Reset Button
|
| LEDs |
- Power LED
- Hard Drive Activity LEDs
- 2x Network activity LED
- System Overheat/Fan Fail LED
- Power fail LED
|
| Ports |
|
| Expansion Slots |
Left Slot |
|
| Right Slot |
- 1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth)
|
| Drive Bays |
Hot-Swap |
- 16x 2.5" SAS / SATA Hot-swap drive trays
|
| Peripheral Drives |
DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| SAS/SATA Backplane |
2U SAS / SATA Backplane |
| System Cooling |
Fans |
|
| Shroud |
|
| Power Supply |
Power | - 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
|
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| With Power Distributor |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
Certification |
- 80 PLUS Platinum Certified
|
|
| PC Health Monitoring |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x Fan Connectors
- PECI
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| Operating Environment / Compliance |
RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10 to 35C (50 to 95F)
- Non-operating Temperature: -40 to 70C (-40 to 158F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
Includes the following parts:
|
