Skip to main content

4-Bay Base System 1U Server

SKU:
6016T-MTLF

Description


This is a NEW Supermicro 6016T-MTLF 4-Bay Base System with a 3 Year Warranty.


This Supermicro system is configured for cost-effective power for enterprise level application. This system offers gold level Power Efficiency with 100% cooling redundancy. With four hot-swap 3.5" SATA HDD support, a possible 48GB of RAM, I/O expansion through PCI-Express 2.0 x8 (in x16 slot) and two possible Nehalem Core Intel Xeon processors, this system boasts high scalability for the best system value in a 1U form factor. With our 3 Year Warranty, your system is covered for any contingency.


For more information: Please e-mail us at sales@vectordata.com. We can customize servers to your needs.


Specifications:


Features

Product SKUs

  • SYS-6016T-MTLF: SuperServer 6016T-MTLF (Black)
Motherboard
  • Super X8DTL-IF
CPU:
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel 64-bit Xeon processor(s) of the same type: Quad-Core Intel Xeon Processor 5500 sequence (Nehalem-EP processor)
  • NOTE: Support processors with Max TDP < 100W
  • QPI: up to 6.4 GT/s
System Cooling
  • 4x 4cm heavy duty RPM fans
Drives and Back Plane
  • Drive Bays: 4x 3.5" Hot-swap SATA drive bays
  • Backplane: 1x SATA Backplane
Memory

Memory Capacity

  • 6x 240-pin DIMM sockets
  • Supports up to 48 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs.
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices

Chipset

  • Intel 5500 (Tylersburg) chipset
  • ICH10R + IOH-24D
Serial ATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond WPCM450 BMC
Network Controllers
  • Dual Intel 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond 83827HF chip
Input / Output

Serial ATA

  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 2x USB internal headers
  • Total 6 USB 2.0 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
Chassis

Form Factor

  • 1U Rackmount
Model
  • CSE-813MTQ-350CB
Dimensions

Height

  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 19.8" (503mm)
Gross Weight
  • 31 lbs (14.1kg
Available Colors
  • Black
System BIOS

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI BIO
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard Support
Expansion Slots

PCI-Express

  • 1 PCI-E(x8) in x16 slot
Front Panel

Buttons

  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x Front USB Ports
  • 1x Serial COM Port
350W AC power supply w/ PFC

AC Voltage

  • 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V
  • 18 Amp
+5V standby
  • 3 Amp
+12V
  • 29 Amp
+3.3V
  • 15 Amp
Certification
  • 80 PLUS Gold Certified
PC Health Monitoring

CPU

  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator
FAN
  • Total of six fan headers supporting up to 6 fans
  • Six 4-pin fan headers
  • 6x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 6x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Operating Environment / Compliance

RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10C to 35C (50F to 95F)
  • Non-operating Temperature: -40C to 70C (-40F to 158F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
4-Bay Base System 1U Server 6016T-MTLF