4U Rackmount Tower Dual Xeon PCI-e 2.0 8x SAS2 Server

Chassis:

• CSE-745TQ-920B

• 4U Rackmount

Motherboards

• Super X8DT6-F

CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
• Intel® Xeon®Processor 5600 Series (Westmere)
• Intel® Xeon®Processor 5500 Series (Nehalem-EP)

• up to 6.4 GT/s

Memory Capacity

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB, 16GB

Memory Voltage

• 1.5V / 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Chipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R

• LSI 6Gbps SAS 2008
• RAID 0, 1,10 support
• (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

Network Controllers

• 2x Intel® 82574L Gigabit Ethernet Controllers
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW 16 MB DDR2

Super I/O

• Winbond 83827HF chip

PCI-Express

• 3 (x8) PCI-E 2.0 slots
• 1 (x4) PCI-E 2.0 slot
• 1 (x4) PCI-E slot

SAS

• 8x 6Gbps SAS / SATA ports

Serial ATA

• Six Serial ATA ports
• 6 SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 IPMI port

USB

• 4x USB rear ports
• 2x USB on-board (TypeA)
• 4x USB internal headers
• Total 8 USB 2.0 Compliant

Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header (Option)

BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Height

• 7.0" (178mm)

• 17.2" (437mm)

Depth

• 25.5" (648mm)

Gross Weight

• 60 lbs (26.3kg)

Buttons

• Power On/Off Button
• System Reset Button

• Power LED (on power button)
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED

Ports

• 2x USB Ports

Hot-Swap

• 8x SAS2 Hot-swap Drives

Peripheral Bay(s) [90o Rotatable]

• 2x 5.25" Peripheral Drive Bay
• 1x 5.25" Bay for Floppy Drive

SC743 SAS / SATA Backplane w/ Enclosure Management

Fans

• 2x 8cm Hot-swappable PWM Cooling Fans
• 1x 9cm Rear Exhaust PWM Fan
• 2x Active heatsink w/ heatpipe

Power

• 920W high-efficiency (94+%) power supply with PMBus

AC Input

• 100 - 240V, 50-60Hz, 11-4.5 Amp

• 4 Amp @ +5V standby
• 75 Amp @ +12V

• +5V: 30 Amp
• +3.3V: 24 Amp
• -12V: 0.6 Amp

Certification

• 80 Plus Platinum Certified

CPU

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages..
• 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

• Total of eight fan headers supporting up to 8 fans
• Eight 4-pin fan headers
• 8x fans with tachometer status monitoring
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• Thermal Control for 8x fan connectors
• PECI

• Chassis intrusion detection
• Chassis intrusion header

• Operating Temperature: 10° to 35°C (50° to 95°F)
• Non-operating Temperature: -40° to 70°C (-40° to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)