Chassis: |
- CSE-818G-1400B
Form Factor | |
Motherboards |
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W-130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
|
QPI |
|
System Memory: |
Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes | - 1GB, 2GB, 4GB , 8GB, 16GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices |
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond WPCM450 BMC
|
Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
Clock Generator |
|
Expansion Slots |
PCI-Express |
- 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
|
Input / Output |
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Serial Port |
- 1 Fast UART 16550 serial port
|
System BIOS |
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
Dimensions: |
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Front Panel |
Buttons |
- Power On/Off Button
- System Reset Button
|
LEDs |
- Power LED (on power button)
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
Drive Bays |
Hot-Swap |
- 3x 3.5" Hot-swap drive bays
|
Backplane |
SAS/SATA HDD Backplane (SAS support requires optional SAS controller) |
System Cooling |
Fans |
- 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
|
Power Supply |
Power | - 1400W high-efficiency power supply with PMBus
|
AC Input |
- 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output +5V Standby |
|
DC Output +12V |
- 100 Amp @ 100-140V
- 117 Amp @ 180-240V
|
Certification |
|
|
PC Health Monitoring |
CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages
- CPU Core 6-Phase-switching voltage regulator
|
Fan |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features |
|
Operating Environment / Compliance: |
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
Includes the following parts:
- Super X8DTG-DF Motherboard
- 1U Black SC818G Chassis
- Air Shroud
- 3x Hot-swappable Hard Drive Trays
- Sup 3X SAS/SATA hdd; SATA con
- 3x 35CM SATA FLAT S-S W/ LATCH PBF
- 2x 6+2pin GPU power extension from MB GPU 8pin, 40cm
- 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF
- For X8 series
- RSC-R1UG-E16R-O-P (right side PCIEx16 riser card)
- RSC-R1U-E16R
- RSC-R1UG-E16-O-P (left side PCIEx16 riser card)
- 2x 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
- 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
- Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20"( 50cm)
- 4x 40 x 40 x 56 mm Counter-rotating 17K /
- 4x 40x56,4 Pin,PWM, Primary for SC818,825M, Secondary for SC815
- Rail set, quick/quick, optional for 1U 17.2"W SC815
If you would like more information on the product: please contact our sales department by sending an email to sales@Vector Data.com or by calling us at (877) Vector Data.
1U Dual Xeon Quad-Core PCI-E 2.0 3X SATA Server 6016GT-TF SYS-6016GT-TF, 6016GT-TF, CSE-818G-1400B, Super X8DTG-DF
|