1U Dual Xeon Quad-Core PCI-E 2.0 Mellanox ConnectX-2 PCI-E 2.0 3x SATA Server

Chassis:

• CSE-818G-1400B

• 1U Rackmount

Motherboards

• Super X8DTT-IBQF

CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel\'ae 64-bit Xeon\'ae processor(s) of the same type below:
• Intel® Xeon®Processor 5600 Series (Westmere)
• Intel® Xeon®Processor 5500 Series (Nehalem-EP)

• up to 6.4 GT/s

Memory Capacity

• 18x 240-pin DIMM sockets
• Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB**, 16GB**

Memory Voltage

• 1.5V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel\'ae x4 and x8 Single Device Data Correction (SDDC)

Infiniband

• Mellanox ConnectX-2 QDR Infiniband 40Gbps Controller

Chipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond WPCM450 BMC

Network Controllers

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW

Super I/O

• Winbond W83827HG chip

Clock Generator

• 932S421 chip

PCI-Express

• 1 (x16) PCI-E (FHFL)

Serial ATA

• Six Serial ATA ports
• Six SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2 rear + 1 header (2 Ports)
• 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

• 1x VGA Port

Infiniband

• 1 External QSFP Infiniband Connector

Serial Port

• 1 Fast UART 16550 serial port

BIOS Type

• 32Mb SPI Flash EEPROM with AMI\'ae BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Height

• 1.7" (43mm)

• 17.2" (438mm)

Depth

• 28.2" (716mm)

Gross Weight

• 38 lbs (17.2 kg)

Buttons

• Power On/Off Button
• System Reset Button

• Power LED (on power button)
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED/ Fan fail LED / UID LED

Hot-Swap

• 3x 3.5" Hot-swap drive trays

SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

Fans

• 4x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control

Shroud

• 1x Air Shroud

Power

• 1400W high-efficiency power supply with PMBus

AC Input

• 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
• 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp

• 4 Amp

• 100 Amp @ 100-140V
• 117 Amp @ 180-240V

Certification

• 80 PLUS Gold Certified

CPU

• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator

FAN

• Total of four 4-pin PWM fans
• 4x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 4x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED

Other Features

• SDDC Support

RoHS

• RoHS Compliant

• Operating Temperature: 10 to 35C (50 to 95F)
• Non-operating Temperature: -40 to 70C (-40 to 158F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)