Skip to main content

2U Dual CPU 2x Xeon Quad-Core PCI-E 2.0 6x SATA Server

SKU:
SYS-6026TT-GTRF

Description

Supermicro 6026TT-GTRF 2U Rackmount Dual CPU 2x Xeon Quad-Core PCI-e 2.0 6x SATA Server


Call us at 1-877-Vector Data to customize your system to your needs.


Technical Highlights:

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • 1 (x16) PCI-E 2.0 for Double-Width GPU
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • 6x Hot-swap SATA Drive Bays
  • 1400W Gold-level High-efficiency Redundant Power Supply

Specifications:


Features:

Chassis:

  • CSE-827HD-R1400B
Form Factor

  • 2U Rackmount

Motherboards

  • 2x Super X8DTT-HF+

CPU

  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
  • Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W-130W
  • Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI
  • up to 6.4 GT/s

System Memory:

Memory Capacity

  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

  • 1GB, 2GB, 4GB , 8GB, 16GB

Memory Voltage

  • 1.5V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
<
On-Board Devices (per Node)
Chipset
  • Intel® 5500 (Tylersburg) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond WPCM450 BMC

Network Controllers

  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

  • Matrox G200eW

Super I/O

  • Winbond W83827HF chip

Clock Generator

  • 932S421 chip
Expansion Slots (per Node)

PCI-Express

  • 1 (x16) PCI-E 2.0 for Double-Width GPU
Input / Output (per Node)

Serial ATA

  • Six Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA Port

Serial Port

  • 1 Fast UART 16550 serial port
System BIOS (per Node):

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Dimensions:

Height

  • 3.5" (89mm)
Width
  • 17.2" (437mm)

Depth

  • 28.5' (724mm)

Gross Weight

  • 85 lbs (38.6kg)
Front Panel (per Node)

Buttons

  • Power On/Off Button
  • UID button
LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
Drive Bays (per Node)

Hot-Swap

  • 6x 3.5" SATA Hot-swap drive bays
Hard drive Backplane

2U Hard drive Backplane

System Cooling

Fans

  • 4x Cooling Fans
Power Supply with Power Distributor

Power

  • Redundant 1400W high-efficiency power supply with PMBus

AC Input

  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output +5V standby
  • 6 Amp
DC Output +12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V

Certification

  • 80 PLUS Gold Certified
PC Health Monitoring

CPU

  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
Operating Environment / Compliance:

RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10 to 35C (50 to 95F)
  • Non-operating Temperature: -40 to 70C (-40 to 158F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)


Includes the following parts:
  • 2x Super X8DTT-HF+ Motherboard
  • 2U Black Chassis
  • 2x BPN-SASADPûSAS827-X8DTT-H+;no cable req
  • 2x BPN-ADP-PWR
  • Sup 6x3.5ö SATA hdd; hot swap
  • 4x 6+2pin GPU power extension from MB GPU 8pin, 40cm
  • For X8 series
  • 2x RSC-R2UT-E16R-O-P
  • 4x 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
  • 2x 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3"
  • 4x 80X38MM 9.5K RPM 4-PIN PWM FAN FOR SC827
  • Rail set, quick/quick, default for 2,3U 17.2"W

    If you would like more information on the product: please contact our sales department by sending an email to sales@Vector Data.com or by calling us at (877) Vector Data. 2U Dual CPU 2x Xeon Quad-Core PCI-E 2.0 6x SATA Server 6026TT-GTRF SYS-6026TT-GTRF, 6026TT-GTRF, CSE-827HD-R1400B, Super X8DTT-HF+