This is a NEW Supermicro X8DTG-DF, 1U Dual Xeon Dual GPU PCI-E 2.0 x16 ServerBoard. Offer includes a 3 Year Warranty.
If you would like more information on the product please contact our sales department by sending an email to sales@vectordata.com or by calling us at (877) Vector Data.
Specifications:
| Physical Stats |
Form Factor |
- Proprietary
| Dimensions |
- 16.64" x 7.71 " (42.26cm x 19.581cm)
| |
| Processor/Cache |
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below:
- Intel® Xeon®Processor 5600 Series (Westmere)
- Intel® Xeon®Processor 5500 Series (Nehalem-EP)
| QPI | | |
| System Memory |
Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
| Memory Voltage |
- 1.5 V / 1.35V
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
| | | | |
| On-Board Devices |
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| Network Controllers |
- 2x Intel® 82576 Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Super I/O | | | | | |
| Input / Output |
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB |
- 2x USB rear ports
- 2x USB internal headers
- Total 4 USB 2.0 Compliant
| VGA |
- 1x VGA Port
| Serial Port / Header | | | | | |
| Chassis |
1U Rackmount |
- CSE-118G-1400B
- CSE-818G-1400B
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models.
| |
| Expansion Slots |
PCI-Express (w/ risers) |
- 2 (x16) PCI-E 2.0 or 4 (x8) PCI-E 2.0
- 1 (x4) PCI-E 2.0 slot
|
| System BIOS |
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.2
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| |
| Management |
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super Doctor III
| Power Configurations |
- ACPI/ACPM Power Management
| |
| PC Health Monitoring |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PECI
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
| | | |
| Operating Environment / Compliance RoHS |
RoHS 6/6 |
- RoHS Compliant 6/6, Pb Free
| Environmental Spec |
- Operating Temperature: 10 to 35C (50 to 95F)
- Non-operating Temperature: -40 to 70C (-40 to 158F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
1U Dual Xeon Dual GPU PCI-E 2.0 x16 ServerBoard X8DTG-DF X8DTG-DF
